Contact Us | Support
 
 
PicPro-Developer Pack
Encrypted Programmer for Microchip PIC MCU's
PicPro-Developer + PicPro-User + Pic-Flash IC Programmer
A boon for every developer of PIC MCU’s.
PicPro-Developer Software



By using Innovative encryption technology users will be able to program the encrypted lpf file on to the controller chip with quantity as set by developer.

PicPro Developer Software

 



PicPro-User + Pic-Flash IC Programmer Hardware


PicPro User Hardware + PicFlash Programer

  • XYZ.lpf file’s encrypted data is embedded into PicPro-User Hardware.
  • 2 layer software and hardware encryption combination gives double
    protection to effectively prevent data leakage.

  • Users during the program, can only see the number of chips that has been programmed & balance Qty. to be programmed.

PicPro User Interface
  • In actual operation, After the predefined programming count is reached, the user will not be able to continue programming chips, thereby giving developer a total control on number of copies of microcontroller made.
  • No Click programming option. [Mass Production Mode].
  • Using PicFlash software user can use the same hardware to program large varieties of PIC MCU’s.

Devices Supported
12F508
16C84
16F84
16F72
16F73
18F258
16C83
16F83
18F1320
16F872
16F873
16F747
6F648A
18F1220
16F870
16F872
18F252
16F877
A16LF648A
16F767
18F242
18F248
16F74
18F4220
16F76
16F876A
18F2439
18F2539
16F874A
 
16F876
18F2320
16F871
16F874
18F458
 
18F2220
16F777
18F448
18F452
16F676
 
16F77
18F442
12F675
16F630
16F628A
 
16F877A
12F629
16F627A
16F628
16F737
 
12F509
16F627
16F84A
16LF627
16F873A
 


Software update
Free software updates available via web at www.ucmicrosys.com

Programmer Package Contents        System Requirements
Standard package contains the following :
 
The minimum requirements are as follows:
A ucFlashPro User Programmer
A PC, IBM or compatible, desktop, with one Serial port.
ucFlashPro Developer software, Installation software CD
Win Xp
Serial cable , 10Pin FRC F-F cable for ISP
CD-ROM driver
An AC adapter
Hard disk of at least 100MB of spare capacity
Registration card
   

Specification
Programmer dimensions
:
105mm L x 130mm W x 25mm H
Power supply
:
Input AC 100 to 240V, Output : DC 16V/350mA.
Weight
:
375 gms


First Time Buyer should buy Developer Pack
© Copyright 2006-2007 UC Micro Systems. All rights reserved