ISPC-51 |
In System Programmable Controller for 8051 family
Low cost alternative to microcontroller emulator with plug and play functionally for very fast prototype development.
|
|
|
 |
Plug and play functionality for very fast prototype development. |
|
No need of any external hardware for Programming. |
|
Apply power to target Board, Next connect it to computers serial port via supplied cable and controller is ready for use. |
|
Can be used in place of any 40-pin 8051 Microcontroller. |
|
Programming via FlashMagic software. |
|
Comes with 64KB Flash ROM and 1KB SRAM |
|
On-board 11.0592MHz crystal. |
|
Facility to use external crystal from target PCB. |
|
|
Dimensions |
: |
75mm L x 25mm W x 30mm H |
|
Operating Voltage |
: |
5V DC. |
|
Weight |
: |
55 gms |
Programmer Package Contents  System Requirements |
Standard package contains the following : |
|
The minimum requirements are as follows: |
|
ISPC-51 board |
|
A PC, IBM or compatible, desktop, with one Serial port. |
|
P89C61X2BN on board |
|
Win98 SP2/NT/2000/ME/Xp |
|
Installation software CD |
|
CD-ROM driver |
|
RJ45 to Serial connecting cable |
|
Hard disk of at least 100MB of spare capacity |
|
Jumpers [2] on Board for Crystal Selection |
|
|
Installation Software CD Contents IC’s supported by ISPC51- via Flash Magic |
|
User Manual |
|
P89C51RD2 |
|
FlashMagic Software |
|
P89V51RD2 |
| |
|
|
P89C61X2BN * |
| |
|
|
Included on Board * |
|
