Hardware Features

• Computer Interface
  USB port
• Universal Pin Drivers
  48 Pin ZIF socket with universal 40pin-drivers., No adapter required for DIP devices
• Algorithms with machine architecture
  Constructed around FPGA to achieve ultra-high programming speed
• Super programming speed
  Programs 89C58 in less than 4 seconds
• Over current & over voltage protection
  Added on each pin, to protect programmer hardware from destroying, due to bad chip, short circuit and ESD
• User-selectable verification
  Select verification voltage, e.g., Vcc, Vcc ±5%, Vcc ±10%. This verification ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention
• Device insertion and contact checks
  Performs device insertion and contact check before it programs each device & can detect poor pin contact & devices inserted upside down or in the wrong position. This function prevents chip from getting damaged due to operator error
• Remote Laptop Programming
  No external AC adapter needed for most devices [for Devices having Vp < 12V]. Works on supply taken from USB port
• Universal PLCC, SOIC, SSOP,.. to DIP adapters
  No need to purchase a new adaptor for different devices of same package
• Over 45 different adapters
  To support PLCC, SOIC, TQFP, TSSOP & other SMD devices

Software Features

• Support Windows OS
  WIN98 SP2/NT/2000/ME/XP/Vista/Win7 32 bit/ Win7 64 bit Os.
• File formats supported
  Binary, Intel Hex, Motorola S, Tektronix, formats and auto find format.
• Identifies the manufacturer and type of E(E)PROMs#
  Many EPROM and Flash memories have a build-in device ID and manufacturer ID. Programmer can read the device ID by selecting a checkbox, to detect the ID and compare its database to determine the chip’s correct vendor and product number. This feature is especially useful with second hand chips and devices that have had their part number accidentally (or intentionally) removed (# function only applies to 28/32 pin EPROM and Flash memories only).
• User-friendly interfaces
  With pull-down menus, pop-up dialogue box and help.
• OTP- security for AT89C5X
  Function available for AT89C51/52. Applying this function will disable Re-programming.
• Mass Production mode
  Programmer automatically detects & programs device, you don’t need to press any key. Furthermore, in the mass-production mode the system keyboard is automatically disabled, preventing the worker from making any accidental mistakes. For Quantity Production, user can connect 4 UNIPro programmers to a single computer. Quantum users who would like know more about this feature please contact our Customer Support Engineer.
• Project file save and load
  User can create and save a project file which contains device selection, buffer data and all the programming set-up options. This project file can be called upon at any time for future use, without having to go through the setting up procedure again. Your design file can easily be sent to production department without any operator error.
• Make your own SMD Adapter
  If you wish to build a adapter on your own, UNIPro Software provides SMD adapter pin swapping tables.
• Supports all operations
  Such as read, blank check, erase, program, secure, verify,Program Configuration and so on.
• Set addresses intelligently
  Device start address, device end address, from buffer address and so on.
• Integrated editors
  To modify HEX files, JEDEC files with commands – fill, copy, move, swap, etc.
• Supports most of the compilers for PLD’s in JEDEC format
  ABEL, CUPL, PALASM, OrCAD PLD, PLD Designer and ISDATA
• Adjustable IC parameters
  Adjustable programming algorithms such as Vpp voltage, and impulse width.
  N.B – To be used by an experienced user only.
• Serialization function
  If your devices need individual serial numbers with different increment sequence and initial value, the programmer simply increments the serial numbers in the buffer each time a new device is inserted.
• Digital IC Tester ^
  Tests TTL 74xxx 54/74 (LS/HC/HCT/ALS/S/AS/F/..) xxx series.
  Tests 40XX, 41XX, 45XX CMOS IC’s. You can add a new device by entering test vector tables of the new device to be tested.
• Auto Find Device
  Conducts exhaustive functional tests & finds out of the number of an unknown device (TTL & CMOS).
• Add on’s
  Built in 8- channel, logic analyzer, Frequency generator125Khz, & Frequency meter upto 100KHz.

Supported Devices