ucFlashplus |
Specialized IC Programmer for Atmel 89XX / AVR’s & I2C EEPROM's
Ideal for a starter up.
High on Features - Low on Cost.
|
|
The ucFlashplus Programmer is an affordable, reliable, and fast programmer for
MCS51/AVR Microcontrollers and 24Cxx I2C EEPROMs. The programmer is designed
to operate with the Intel Pentium-based IBM-compatible desktop computers.
The menu-driven software interface makes it easy to operate.
|
|
 |
Single 40 Pin ZIF for 8 to 40 Pin Devices. |
 |
|
RS232 Serial Port Interface. |
|
Programmer firmware update through computer. |
|
ISP programming supported. |
| |
|
|
Works on Win Xp Operating System. |
 |
|
User-friendly interfaces with pull-down menus, pop-up dialogue box and help. |
|
Device insertion test. |
|
Support all operations, such as read, blank check, erase, program, secure, & verify. |
|
Easy to use integrated HEX Editor on main software window. |
|
Supports Intel (linear & segmented) HEX (INHX8M). |
|
Auto Batch Program function for faster programming i.e. Mass Production mode. |
 |
|
Automatic device identification before programming. |
|
Support for programming only a selected memory in the microcontroller e.g.
Data memory or Fuse Bits. |
| |
|
AT89C1051 |
AT89LV52 |
ATMEGA32* |
L ATTINY12 |
I²C EEPROMs |
| AT89C2051 |
AT89LV55 |
ATMEGA32L* |
ATTINY12L |
AT24C00 |
AT89C4051 |
AT89S51 |
ATMEGA162 |
ATTINY12V |
AT24C01 |
AT89C51 |
AT89S52 |
ATMEGA162L |
ATTINY13 |
AT24C02 |
AT89C51-5 |
AT89S53 |
ATMEGA162U |
ATTINY13V |
AT24C04 |
AT89C52 |
AT89S8252 |
ATMEGA162V |
ATTINY15 |
AT24C08 |
AT89C52-5 |
AT89S8253 |
ATMEGA8515 |
ATTINY15L |
AT24C16 |
AT89C55 |
ATMEGA128* |
ATMEGA8515L |
ATTINY2313 |
AT24C32 |
AT89C55-5 |
ATMEGA128L* |
ATMEGA8535* |
ATTINY2313V |
AT24C64 |
AT89C55WD |
ATMEGA8* |
ATMEGA8535L* |
A*via ISP only |
AT24C128 |
AT89LS51 |
ATMEGA8L* |
ATTINY11 |
|
AT24C256 |
AT89LS52 |
ATMEGA16* |
ATTINY11L |
|
AT24C512 |
AT89LV51 |
ATMEGA16L* |
ATTINY11L |
|
AT24C1024 |
|
|
Dimensions |
: |
105mm L x 130mm W x 25mm H |
|
Operating Voltage |
: |
Input AC 100 to 240V, Output : DC 14.5V/150mA. |
|
Weight |
: |
375 gms |
|
1 year limited warranty |
|
Free software updates available via web at www.ucmicrosys.com |
Programmer Package Contents  System Requirements |
Standard package contains the following : |
|
The minimum requirements are as follows: |
|
A programmer |
|
A PC, IBM or compatible, desktop or laptop, with one Serial port. |
|
Serial cable, 10Pin FRC F-F cable for ISP |
|
Win Xp |
|
An AC adapter |
|
CD-ROM driver |
|
Installation software CD |
|
Hard disk of at least 100MB of spare capacity |
|
Registration card |
|
|
|
|
