UNI-51-SDK |
Entry level 89x51 [8051] / AVR Trainer Kit Software /
Hardware development platform
for 40-pin MCS51 and AVR family #
|
|
UNI-51-SDK allows you to have a well known and documented hardware both under electronic and software point of view. UNI-51-SDK is ideal for setting up a basic embedded lab enabling large number of students to study the concepts of embedded design and implement the same.
|
 |
|
| 1. |
Experimental board for 40-pin MCS51 and AVR family of microcontrollers |
 ucFlash
ISP |
| 2. |
In-System Programming (ISP) facility for many microcontrollers. * |
| 3. |
Double RESET signal with manual key |
| 4. |
Crystal frequency: 11.0592MHz |
| 5. |
On-board RS232 Compatible Serial Interface terminated in a 9-Pin 'D' female connector |
| 6. |
4x4 Matrix Keyboard |
| 7. |
16x2 Alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment |
| 8. |
Four 7-Segment CA LED Displays |
| 9. |
I2C EEPROM (24Cxx) |
| 10. |
Real Time Clock (DS1307) with Lithium battery and SRAM |
| 11. |
8-High current output port (500mA) for driving external loads |
| 12. |
Two 12V Sugar Cube Relays |
| 13. |
Continuous Tone Piezo Buzzer |
| 14. |
Temperature sensor socket with thermostat functions (DS18S20) - Optional |
| 15. |
Four 8-bit A/D converter one 8-bit D/A converter provided by PCF8591 |
| 16. |
All port-pins available on 10-pin box header |
| 17. |
8 LEDs for easy logic state monitoring |
| 18. |
8 Input Trigger Switches using 8 push buttons |
| 19. |
ISP Programming with ucFlash ISP for AT89S51/52/8252/AVR* …… |
| 20. |
Infrared remote control receiver module (free RC5 remote control included) |
| |
Starting from simple experiments, it makes you grow in experience and complexity [with real life sample codes] to being able to deal
with competence and master the fundamental elements which makes the microcontroller based electronics. |
|
User Manual / Circuit Diagrams / Installable Software / Sample Programs / Useful Links |
Sample Programs in Bascom & Hex
|
1. |
LED Blinking |
7. |
Thermostat |
2. |
16 x 2 LCD Module |
8. |
LCD + Keyboard + Buzzer |
3. |
Dancing LED’s |
9. |
Real Time Clock |
4. |
I2C EEPROM |
10. |
4 x 7 Segment LED Display Driving. |
5. |
ADC |
11. |
UNI_51_SDK_Test.hex [Pre-loaded to test] |
6. |
RC5 – IR Remote Decoder |
|
|
Installable Software on CD
|
 |
Programmers Notepad |
: |
Free, open source, text editor |
 |
|
ucFlash Programmer Software |
: |
ucFlash ISP Programmer software for 89SXX |
|
Bascom Basic Compiler |
: |
Demo Version |
|
MIDE-51- by Worapoht Kornkaewwattanakul |
: |
An IDE for MCS-51 microcontroller |
|
WinAVR |
: |
Open Source C Compiler for AVR |
|
|
UNI-51-SDK dimensions |
: |
150mm L x 170mm W x 30mm H |
|
Power supply |
: |
Input AC 100 to 240V, Output : DC 12V/500mA. |
|
Weight |
: |
235 gms. |
|
1 year limited warranty |
UNI-51-SDK Package Contents  IC’s supported by UNI-51-SDK# |
Standard package contains the following: |
|
Programming via :- |
|
UNI-51-SDK board |
|
ucFlash ISP Flash Magic
|
|
AT89S52 & P89C61X2 IC’s |
|
AT 89S51/52 * P89C51RD2 |
|
ucFlash ISP Programmer |
|
AT89S8252 P89V51RD2
|
|
An AC adapter |
|
ATMEGA161/162/8515 P89C61X2BN * |
|
Installation software CD |
|
AT90S8515/4414* Included in the KIT
|
|
RC5 - IR Remote Handset |
|
|
|
Serial connecting cable |
|
IC’s supported by UNI-51-SDK# |
|
Set of Jumpers |
|
The minimum requirements are as follows: |
|
10 Pin FRC F – F Cable |
|
A PC, IBM or compatible, desktop with one Serial port. |
|
IR Receiver Module |
|
Win98 SP2/NT/2000/ME/Xp |
|
4 x 4 Key Board |
|
CD-ROM driver |
|
16 x 2 LCD Module |
|
Hard disk of at least 100MB of spare capacity |
|
