UNI-ISP2 |
Universal IC Programmer + IC Tester + Card IC + ISP
EPROM's, EEPROM's, SPROM's, MCUs, PLD's *
4000+Microcontroller's PLD's, SPROM's
|
|
|
 Hardware Features |
 |
Computer Interface
USB / Parallel port
|
|
 |
|
Algorithms with machine architecture
Constructed around FPGA to achieve ultra-high programming speed.
|
|
Over current & over voltage protection
Added on each pin, to protect programmer hardware from
destroying, due to bad chip, short circuit and ESD
|
|
Super programming speed
Programs 89C58 in less than 4 seconds
|
|
User-selectable verification.
Select verification voltage, e.g., Vcc, Vcc ±5%, Vcc ±10%. This verification ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.
|
|
Remote Laptop Programming
No external AC adapter needed for most devices [for Devices having Vp < 12V]. Works on supply taken from USB port.
|
 |
|
Adjustable IC parameters / Low voltage device support
Adjustable programming algorithms such as Vpp voltage, and impulse width.
N.B. - To be used by an experienced user only.
|
|
Over 45 different adapters
To support PLCC, SOIC, TQFP, TSSOP & other SMD devices.
|
Software Features |
|
Support Windows OS
WIN98 SP2/NT/2000/ME/XP/Vista
|
|
File formats supported
Binary, Intel Hex, Motorola S, Tektronix, formats and auto find format.
|
|
User-friendly interfaces
With pull-down menus, pop-up dialogue box and help.
|
 |
|
Mass Production mode
Programmer automatically detects & programs device, you don't need to press any key. Furthermore, in the mass-production mode the system keyboard is automatically disabled, preventing the worker from making any accidental mistakes. For Quantity Production, user can connect 4 UNIPro programmers to a single computer. Quantum users who would like know more about this feature please contact our Customer Support Engineer.
|
|
Project file save and load
User can create and save a project file which contains device selection, buffer data and all the programming set-up options. This project file can be called upon at any time for future use, without having
to go through the setting up procedure again. Your design file can easily be
sent to production department without any operator error.
|
|
Make your own SMD Adapter
If you wish to build a adapter on your own, UNIPro Software provides SMD adapter
pin swapping tables.
|
|
Supports all operations
Such as read, blank check, erase, program, secure, verify and so on.
|
 |
|
Set addresses intelligently
Device start address, device end address, from buffer address and so on.
|
|
Integrated editors
To modify HEX files, JEDEC files with commands - fill, copy, move, swap, etc.
|
|
Supports most of the compilers for PLD's in JEDEC format
ABEL, CUPL, PALASM, OrCAD PLD, PLD Designer and ISDATA
|
|
Adjustable IC parameters
Adjustable programming algorithms such as Vpp voltage, and impulse width.
N.B - To be used by an experienced user only.
|
|
Serialization function
If your devices need individual serial numbers with different increment sequence and
initial value, the programmer simply increments the serial numbers in the buffer each
time a new device is inserted.
|
Microcontrollers,
SPROM'
s
|
Atmel |
Cygnal / Silicon |
Cypruss |
Microchip |
NXP / Philips |
SPROM's |
Total |
152 |
116 |
50 |
831 |
37 |
2791 |
4095 |
PLD's |
ALTERA |
AMD |
ATMEL |
Lattice |
Vantis |
Xilinx |
|
152 |
116 |
50 |
831 |
37 |
2791 |
After Sales |
The UNI-ISP2 has additional safety features such as a built-in current limit function. This prevents damage from faulty chips during the programming cycle. As a result we have provided a 1 year limited warranty. |
| |
Software update |
Free software updates available via web at www.ucmicrosys.com |
| |
Programmer Package Contents  System Requirements |
Standard package contains the following : |
|
The minimum requirements are as follows: |
|
A programmer |
|
A PC, IBM or compatible, desktop or laptop, with one USB port. |
|
A USB connectingl cable |
|
Win98 SP2/NT/2000/ME/Xp/Vista OS |
|
ISP Cable |
|
CD-ROM driver |
|
Base Board to accommodate DIP / SMD Adapters |
|
Hard disk of at least 100MB of spare capacity |
|
Installation software CD |
|
|
|
User's Guide |
|
|
|
Registration card |
|
|
Specification |
|
Programmer dimensions |
: |
85mm L x 60mm W x 25mm H |
|
Weight |
: |
65 gms |
|
Base board dimensions |
: |
90mm L x 150mm W x 18mm H |
|
Weight |
: |
100 gms |
 |
 |
Optional socket adapters to accommodate PLCC, SOIC, TQFP and TSSOP package types are also available. |
|
| |
