UNI-PIC-SDK |
Entry level PIC Trainer Kit
Hardware software/hardware development platform
for 40/28/18 pin PIC microcontroller family #
|
|
UNI-PIC-SDK allows you to have a well known and documented hardware both under electronic and software point of view.
By means of this kit it is possible to embark on any formative path, in fact, starting from simple experiments, it makes you grow in experience and complexity [with real life sample codes] to being able to deal with competence and master the fundamental elements which makes the microcontroller based electronics.
|
 |
|
| 1. |
Four 7-Segment LED Displays |
 PicFlash
ISP |
| 2. |
Experimental board for 40/28/18 pin PIC microcontroller family # |
| 3. |
In-System Programming (ISP) facility via PicFlash-ISP/PIC-ICD-II/ICD-2 |
| 4. |
In-System debugging / programming via PIC-ICD-II/ICD-2 |
| 5. |
On-board RS232 Compatible Serial Interface |
| 6. |
4x4 Matrix Keyboard |
| 7. |
Two 16x2 Alphanumeric LCD connectors (4-bit interface) |
| 8. |
I2C EEPROM (24Cxx) |
| 9. |
Real Time Clock (DS1307) with battery and SRAM |
| 10. |
All port-pins available on 10-pin box header |
| 11. |
User selectable pull-up/pull-down on all ports |
| 12. |
32 LEDs on each port pin for easy logic state monitoring |
| 13. |
8-High current output port (500mA) for external loads |
| 14. |
One 12V Relay & Buzzer |
| 15. |
Infrared remote control receiver (free RC5 remote control included) |
| 16. |
Eight 10-bit A/D converter two 10-bit D/A converter provided by PIC16F877A/16F876A |
| 17. |
Temperature sensor with thermostat functions (DS1821) socket on board. |
| 18. |
24 Push Button interface – to port pins with Logic 0/1 selection |
| |
|
| |
|
|
User Manual / Circuit Diagrams / Installable Software / Sample Programs / Useful Links |
Sample Programs in Bascom & Hex
|
1. |
4 x 7 Segment LED Display Driving. |
7. |
RC5 IR Remote Decoder |
2. |
ADC |
8. |
Relay Test |
3. |
Dancing LED’s |
9. |
Real Time Clock on LCD |
4. |
Writing I2C EEPROM via Serial Port |
10. |
Serial Port Test |
5. |
Keyboard + LCD |
11. |
UNI_PIC_SDK_Test.hex [Pre-loaded to test] |
6. |
16 x 2 LCD Module |
|
|
Installable Software on CD
|
 |
Programmers Notepad |
: |
Free, open source, text editor |
|
ucPicFlash Software |
: |
cPicFlash ISP Programmer software |
|
MPLAB |
: |
IDE |
|
CCS – C Compiler |
: |
Demo [30Day Trial - Net connection required during installation.] |
|
Hi-Tech C Compiler |
: |
Limited Freeware Version |
|
Boost C Compiler |
: |
Demo |
UNI-PIC-SDK Package Contents  IC’s supported by UNI-PIC-SDK# - PicFlash ISP |
Standard package contains the following: |
|
Programming via :- |
|
UNI-PIC-SDK board |
|
PIC16F72 - 28Pin |
PIC16F73 – 28Pin |
|
PIC16F877A & 16F876A & 16F873A IC’s |
|
PIC16F84 [A] – 18Pin |
PIC16F627 [A] – 18Pin |
|
PicFlash ISP Programmer |
|
PIC16F628 [A]* – 18Pin |
PIC16F629 – 18Pin |
|
An AC adapter |
|
PIC16F648 [A] – 18Pin |
PIC16F870 – 28Pin |
|
Installation software CD |
|
PIC16F872 – 28Pin |
PIC16F873 – 28Pin |
|
RC5 - IR Remote Handset |
|
PIC16F874 – 40 Pin |
PIC16F876 [A]*– 28Pin |
|
Serial connecting cable |
|
PIC16F877 [A]* 40 Pin |
PIC18F242 – 28Pin |
|
10 Pin FRC F – F Cable |
|
PIC18F252 – 28Pin |
PIC18F442 – 40 Pin |
|
IR Receiver Module |
|
PIC18F452 – 40 Pin |
Included in the KIT * |
|
4 x 4 Key Board |
|
|
|
16 x 2 LCD Module |
|
System Requirements |
| |
|
|
The minimum requirements are as follows: |
| |
|
|
A PC, IBM or compatible, desktop with one Serial port. |
| |
|
|
Win98 SP2/NT/2000/ME/Xp |
| |
|
|
CD-ROM driver |
| |
|
|
Hard disk of at least 100MB of spare capacity |
|
|
Dimensions |
: |
155mm L x 170mm W x 30mm H |
|
Power supply |
: |
Input AC 100 to 240V, Output : DC 12V/500mA. |
|
Weight |
: |
235 gms. |
|
