T- Prog Dongle
to Program UniTime
Standard package of T-Prog Dongle contains:
SA T- Prog Dongle
Serial to RJ45 cable for programming
T-Prog - Installation software CD
   
System Requirements
The minimum requirements are as follows:
A PC, IBM or compatible, desktop, with one Serial port.
Win98 SP2/NT/2000/ME/Xp
CD-ROM driver
Hard disk of at least 100MB of spare capacity
Contact Us | Support
   Home Products Download Resources Register About
 
Download IC Search Utility V4.(UNIPro
V3.98)
Universal IC    Programmers
Universal ISP Programmers
IC Programmers
Encrypted
 Programmers
 
UniTime
PC Programmable General Purpose Timer
Think of a timer, Write the program in plain English, Program & Your Timer is ready
The UniTime® PC Programmable Timer is designed to be an economical and flexible solution for any general-purpose timer application. Setup is quick and easy using T-Prog software. The Timer can be configured to activate once for each trigger or free-run as soon as power is applied.
Features

Operating Modes:
One-Shot / Repeat or any other mode upto 1500 lines programmable via PC








Time Settings:
Min. 1 Sec. to Max. 99 Hr., 99 Min., 99 Sec.
Accuracy:
15 Sec/Month at 25oC
Programming:
Via T – Prog Dongle using RS232 serial interface
Software:
T-Prog
Memory:
EEPROM protects against loss of memory due to
power failure.
Ext. Trigger Voltage
4.5 - 24VDC
Load
SPDT Relay Form "C", 7A-24VDC, 3A-220VAC
Current
40mA DC with Relay on
750 lines of ON/OFF Events can be programmed
Program Sample – Cyclic mode with Ext. trigger
1. ON  HH:MM:SS : On for given time
2. OFF HH:MM:SS : Off for given time
3. Trigger : Wait for Ext. Trigger
4. ON  HH:MM:SS : On for given time
5. OFF HH:MM:SS : Off for given time
6. GOTO 1 : Cyclic mode

 
© Copyright 2006-2007 UC Micro Systems. All rights reserved